Plate & Sheet Weight Calculator
Calculate the weight of a rectangular steel plate or sheet from its length, width and thickness, for any material density.
Inputs
Results
- Weight per piece
- 245.31 kg
- Total (1 pcs)
- 245.31 kg
- Total in tonnes
- 0.245 MT
- Weight per m²
- 78.50 kg/m²
- Area per piece
- 3.125 m²
Formula used
W = L × W × T × ρ
All dimensions converted to metres and density in kg/m³, giving weight in kilograms. A 10 mm mild steel plate therefore weighs 78.5 kg per square metre.
Results are theoretical calculations based on the values you enter. Actual weights and quantities vary with manufacturing tolerances. Confirm requirements with our team before ordering.
Other tools
- Pipe Weight CalculatorWeight of a steel pipe from outside diameter, wall thickness and length.
- Pipe Outside Surface Area CalculatorOutside surface area of a pipe for painting, coating and insulation estimates.
- Pipe Volume & Capacity CalculatorInternal volume and water capacity of a pipe run.
- Round Bar Weight CalculatorWeight of solid round bar from diameter and length.
- Flange Weight CalculatorApproximate weight of a flange from outside diameter, bore, thickness and bolt holes.
- Flange Bolt Circle CalculatorBolt hole spacing, chord distance and hole coordinates on a flange bolt circle.
- Flange Bolt Torque CalculatorBolt torque from target bolt load or stress using the K-factor method.
- Gasket Area & Seating Load CalculatorRing gasket contact area and the bolt load needed for a given seating stress.