Pipe Outside Surface Area Calculator
Work out the external surface area of a pipe run for painting, coating, wrapping and insulation estimates — in square metres and square feet.
Inputs
Results
- Area per metre
- 0.3591 m²/m
- Area per piece
- 2.155 m²
- Total (1 pcs)
- 2.155 m²
- Total area
- 23.19 ft²
- Estimated paint
- 0.27 litres
Formula used
A = π × OD × L
OD and length converted to metres, giving area in m². Paint quantity is simply total area divided by the coverage rate you enter — check the coverage figure on your supplier's technical data sheet.
This is the outside surface only. It excludes end faces, fittings, flanges and overlap allowances.
Results are theoretical calculations based on the values you enter. Actual weights and quantities vary with manufacturing tolerances. Confirm requirements with our team before ordering.
Other tools
- Pipe Weight CalculatorWeight of a steel pipe from outside diameter, wall thickness and length.
- Pipe Volume & Capacity CalculatorInternal volume and water capacity of a pipe run.
- Plate & Sheet Weight CalculatorWeight of a rectangular steel plate or sheet from length, width and thickness.
- Round Bar Weight CalculatorWeight of solid round bar from diameter and length.
- Flange Weight CalculatorApproximate weight of a flange from outside diameter, bore, thickness and bolt holes.
- Flange Bolt Circle CalculatorBolt hole spacing, chord distance and hole coordinates on a flange bolt circle.
- Flange Bolt Torque CalculatorBolt torque from target bolt load or stress using the K-factor method.
- Gasket Area & Seating Load CalculatorRing gasket contact area and the bolt load needed for a given seating stress.