Flange Weight Calculator
Estimate the weight of a flange from its outside diameter, bore, thickness, hub and bolt holes — useful for costing, freight and lifting checks.
Inputs
Results
- Weight per flange
- 10.16 kg
- Total (1 pcs)
- 10.16 kg
- Total in tonnes
- 0.010 MT
- Material volume
- 1,294.4 cm³
Formula used
V = π/4 × (OD² − B²) × t + π/4 × (Dhub² − B²) × h − n × π/4 × d² × t
All dimensions in millimetres; weight W = V × ρ × 10⁻⁹ with density ρ in kg/m³. Leave the hub fields at zero for a plate or blind-style flange without a hub.
This is a geometric approximation: raised faces, tapered hubs, chamfers and machining allowances mean the actual flange weight will differ slightly from the calculated figure.
Results are theoretical calculations based on the values you enter. Actual weights and quantities vary with manufacturing tolerances. Confirm requirements with our team before ordering.
Other tools
- Pipe Weight CalculatorWeight of a steel pipe from outside diameter, wall thickness and length.
- Pipe Outside Surface Area CalculatorOutside surface area of a pipe for painting, coating and insulation estimates.
- Pipe Volume & Capacity CalculatorInternal volume and water capacity of a pipe run.
- Plate & Sheet Weight CalculatorWeight of a rectangular steel plate or sheet from length, width and thickness.
- Round Bar Weight CalculatorWeight of solid round bar from diameter and length.
- Flange Bolt Circle CalculatorBolt hole spacing, chord distance and hole coordinates on a flange bolt circle.
- Flange Bolt Torque CalculatorBolt torque from target bolt load or stress using the K-factor method.
- Gasket Area & Seating Load CalculatorRing gasket contact area and the bolt load needed for a given seating stress.